Hi.

Tried to install nix but am stuck with an issue I’m not able to resolve. Whenever I boot the system, it uses approx 5min on the boot-up of Nixos Stage #1 as seen in the picture. After a while it will boot into the system but without a GUI. I’ve done the installation twice, with different isos to make sure I didn’t do it wrong. It only works if I downgrade to nixos 23.11, but if I update(+plasma 6) from there It results in the same problem.

The error is:

kernel: Acpi Error: Aborting method (long string) due to previous error (AE_AML_UNINITIALIZED_ELEMENT)

Have no idea what this error is, and there don’t seem to be alot of info on it. Reaching out here to see if anyone is able to help me troubleshoot this, as I would really like to try latest Nixos.

  • ChrysanthemumIndica@discuss.tchncs.de
    15·
    3 months ago

    Agreed with others that this is likely a BIOS issue, and it would be good to check for a firmware update first.

    In particular, this looks like it might be an issue with the USB port locations described by your BIOS ACPI. Maybe one of the embedded root hubs? You might be able to play with USB settings in the BIOS Config to see if that helps, especially loading default values. I also think it might be possible to blacklist ports from kernel parameters and that could be a good check… but I’m not very familiar with the parameters in recent years and didn’t find anything in a quick search.

    As a last ditch, you can disable ACPI entirely, but it can/will cause very odd performance and configuration issues along with no power management. (This goes double for portable systems.)

    • Sunny' 🌻@slrpnk.netOP
      3·
      3 months ago

      Hmmm might be, I’m also experiencing very long boot times. Normally have to wait 3-6min while watching the Asus ROG logo before the system decides to boot up. Might just be easier to look for a new mobo than to troubleshoot something I know so little about to be honest.

      • ChrysanthemumIndica@discuss.tchncs.de
        4·
        2 months ago

        That’s definitely a frustrating situation you have, and I very much encourage you to take the path that feels most possible to you!

        Before moving on, I would like to point to trying what u/mvirts suggested, disabling ACPI from the grub bootloader. It’s easy and great for getting an installer running and working, and sometimes the freshly installed and updated OS whisks the problem away.

        But regardless of what you choose, I wish you much luck in your endeavours!