This is pretty cool! Might test it out at some point. Thanks for the write up.
This is pretty cool! Might test it out at some point. Thanks for the write up.
I did not verify my thoughts but I think this could be because ovh has big datacenters in Germany and quite a lot of Europeans use ovh.
It’s honestly a really well designed project. The engine and gui can run independently of each other so you can run the engine headless and interface with it via osc. This is what I do and works very well. The midi sync is very good and remains sync for days on end if your jack is stable. I make music with a friend who runs ableton and we both do live looping with a shared clock and never run into problems. Anyway, give it a spin!
Not sure you can get it to run on Android, but sooperlooper is a very good and stable open source looper. I’ve built a quite elaborate setup around two instances and puredata and it rarely fails. Can highly recommend!
Quite a good follow up talk posted not so long ago.
Are you fermenting under pressure? If so your final gravity will be off by quite a bit using a gyro based meter. The absorbed co2 will give you a false reading. I use mine more to determine when fermentation has stopped and I can bottle. Maybe take a sample and measure with a normal hydrometer and see if your reading is correct.