Lazz45

I just run a wireguard container on my raspberry pi 3b and use that to VPN onto my local network. Was super simple to set up

The cheapest way to do it would be to have a sample line connected to the Dutch oven (metal line) that’s attached to a dog-eared beaker (with rubber tubing), with the other ear of the beaker being a line attached to something pulling a vacuum (like those vacuum nozzles in chem class connected to the sink outlet). You then place this beaker on a hotplate that keeps it warm (so you don’t condense on the glass) and you have a stainless steel cylinder with a rubber outer stopper ring thingy (to seal the beaker). You heat some water to say 190 (I doubt your dew Point is above this temp lol) and then add it to the cylinder. Place a thermocouple in the cylinder and blow air lightly into the tube to lower the temperature. When the cylinder fogs, you have the dew Point temperature of the atmosphere from within the Dutch oven.

Source: This is the same process for getting a dew point of your furnace atmosphere in an industrial setting. The concept is known as a “chilled mirror” dew Point. There are continuous devices that can determine this, but the manual method is cheaper/can withstand higher dew points

If you went for a method using a digital hygrometer, you would still want a sampling line that goes from the Dutch oven, to outside the oven because I’m not aware of any hygrometers that would work in intense heat unless they had their own cooling jacket + cooling system for the mirror & sensor

note: I am trying my best to get a picture of this setup, we use them at work, but searching online is mostly returning inline, digital hygrometers

Edit: Okay, I drew it instead on a sticky note. When the cooling water in the tube makes it fog, that temp on the thermocouple is your dew Point

Well, if they just inherit their dead dad’s debt, would that be a “good life?” Assuming a financial situation is why this occurred. If both parents die is the debt expunged or passed to next of kin? If the debt is passed, they would be forced to declare bankruptcy early in their life (destroying their credit), which destroys a lot of options like college, car ownership, etc.

By no means am I saying this is the better option, just seems like both were quite shitty outcomes to me

Googling a rough average returned 0.346 kwh/mile for electric cars between 2000 and 2022 (wide range, im aware). Traveling at 50MPH, you go 50 miles in 1 hour (assume you’re already going 50, and stay at that speed). So you’d use [0.346KWh/mile] *[50 miles/hour] = [17.3 KW] per hour @ 50 MPH

I torrented and seeded many torrents (its still seeding right now) and it can do at least 2 (havent tried more) jellyfin streams at once as long as I disable server side transcoding to reserve resources. I had the full arr suite of apps running along with ombi (gonna move to jellyseer, but imo ombi used too much ram on my 4GB laptop to be something I kept running). Is it perfect? No, it has quirks that will come up now and again but can I really complain when getting now 16 years of use out of a laptop I never thought I’d touch again once I built my desktop?

Edit: oh be aware, if you’re using old hardware, DO NOT use the newest versions of things like Linux mint, it possibly won’t have drivers that works for really old hardware (like wifi card, Lan card, etc.) and it won’t be easily apparent sometimes. I solved this with a friend who had the same laptop as me but couldn’t get internet once installing mint. It turns out he used a newer version of mint that did not have a way to support his wifi card and installing and older version solved it

I run some of my services (until very recently including jellyfin) on my HP pavilion G6 from 2007. It still runs my wireguard, backup pihole, heimdall, etc. I run it on Linux mint (it was familiar) and cant do most things on screen (lags hard) but I can ssh or VNC in just fine

Yes, in a sense. It technically isn’t vibrating them, but rapidly spinning them due to the constantly changing magnetic field (produced by the magnetron).

Since water has a dipole moment (one side of the molecule experiences a slight positive charge, while one side experiences a slight negative charge) it will react to changes in an electric field just like a magnet would

Edit: I’d also like to add this is not specific to water. Some fats and other food material also undergoes that rotation, and the same concept (with different frequencies and wavelengths) is used in industrial processes all the time to quickly, and efficiently heat materials

There will be those that do and dont get the “nitty gritty” of the theory side of the math. Those people sometimes become math majors. Normal people (joking, dont be mad math majors), need more than simply the theory side of the math and actually need to see/perform the application side of things. I never once “understood” the lesson in math class when we go over the equations with variables only. I only truly began to learn the material and be able to use it once we got to the example problems. We would do multiple in class and then I would understand how to literally go through the problem and perform the math that was expected of me on the homework, and subsequently the test. There is tons of stuff i know how to use in math, but by no means understand WHY it came to be, or HOW its works for the realm of mathematics. I wanna know how this math can help me solve real life problems, problems I will face in industry, or even just a cool way to apply math in the real world. Not how it will be used in research to find new types of math we wont be able to apply for 70 years.

It was pretty funny being in calculus in college. I was in a class with mostly engineers who were also taking the exact same weed out courses, and nearly every day after the professor would finish showing us the theory side of the lesson, hands would shoot up and the question of, “What application does this have in real life or engineering? Like, how will I actually use this?” always got asked. So not “loving” the theory is by no means uncommon (we all wished for an application focused version of the class to exist, for people like stem students who are not into the math theory lol), but I still see the value in having it presented so that you can have a more foundational understanding instead simply going through the motions

The reason they drill it in to the extent that they do is so that you have a foundational understanding of the underlying math on which to build new knowledge. If you show up in calc 1 in college without remembering even the basic concepts you were previously taught in things like trig…that can really bite you in the ass. My teacher LOVED pulling out classic substitutions for Secant, Cosecant, and cotangent (No, i didnt outright remember them from Trig, but I had seen them, and that made refreshing much easier). Also these concepts then form the basis of many other fields such as physics (electricity/magnetism, kinetic motion, optics, etc.), chemistry (quantum, MO theory, and things relating to the physics side of why chemistry occurs), and many of the graphing concepts used in engineering/stem only make sense if you have the foundational understanding of what integration/derivation are. Those stem from understanding how to graph complex functions by hand (like we did in trig) so that when you are doing it later with assistance, you still GRASP what is going on.

Yes its not perfect, and yes for people who never need that later in life it can suck. However, I would make the argument it is better to have more of your population educated to a higher standard than what is needed in daily life, than to only give that to those who are aware enough at a young age to actively seek said education

You can learn to create logic circuits in order to aid automation

Yes, I should be able to play music, AND charge the phone without a 9 wire adapter like those universal charger plugs from 10 years ago. Wild concept. I wonder when phone tech will be able to support such a thing

I’m still running one of the early versions completely fine. I wonder what might be different on your end. I would update but I’m honestly unsure the correct way to update revanced

The issue in my eyes, and my number one complaint with this massive E.V. push (for many years now) is the insane environmental impact of lithium mining and the very short termed planning of just going hard on batteries (without spending more time and money on better battery tech [Toyota actually has that new solid state battery I’m very hopeful for, and we’ve been working on polymer batteries for decades]) we will waste a very precious earth material we WILL NEED in the future, and you never ever hear any of the politicians or CEOs talk about how dirty lithium mining and processing is because almost all of it happens outside the countries leading this push (thus, not their problem).

Not saying we shouldn’t be moving away from ICE, it’s that I feel our current approach is incredibly short sighted, and will have far reaching impacts into future generations and I feel as though we may even cause more damage than help in our current approach

I watch totally fine on my phone and pickup at home. It should sync to your log in account in my experience

Having been involved in plant shutting talks in the steel industry. You’d be shocked what companies are willing to do

They very much can, will, and do for much less. Welcome to an “at-will” employer. The only thing that’s illegal is discrimination

I would be jealous, if sitting at a desk didn’t make me wanna hang myself with an ethernet cable. I’m a process engineer in a steel mill and holy sweet fuck did I wanna die when I was WFH as a desk engineer. Bored out of my mind and feeling like I’ll never progress because I couldn’t even network well with managers/engineers like you can in a mill/in person office.

That’s when I learned at this point in my career, heavily WFH is not for me. I need challenged and I need hands on, 1 of those I very much cannot get at home

It is for most companies. You put the drive into a mileage calculator for your company and they reimburse you a certain amount per mile. You don’t do napkin math, they need legitimate records for accountants, audits, etc.

deleted by creator

Just came to say that companies will do exactly that if the law allows.

Entry level job:

• Req 1
• Req 2

Pay: $1-500,000

and pay you the lowest number you’ll say yes to