Gravis gamepad :-)

Rock solid!

Gravis Ultrasound with red pcb reporting…

That is not how it is supposed to look, the end result should be at least a couple of inches wide.

Maybe you don’t need to ‘fix’ your retraction settings?

If it looks good enough, why bother?

Wasn’t aware of the test (SuperSlicer user here), and found this.

The tower has multiple notches, each one corresponding to a different retraction length. By looking at the tower after printing, you can see how each retraction length affects the print quality.

So check your surface finish and select the retraction value with the best looks.

Esp32Cam with esphome running a webserver, add frigate in the mix and you can have dozens of cameras for just a few bucks.

Completely open source (apart from the espressif wifi radio stack, but who’s counting) and low cost.

Yes, quality of the camera will never compete with commercial stuff, but this is way more fun. Add as much cameras as your frigate instance allows…

Gonna recommend this to all my co workers.

It is not vulnerable to Windows viruses.

:-)

Correct link

Blowtorch will heat this up way too hot.

Try to get it to a high enough temperature to insert filament to do a cold pull and repeat…

Electrical heat gun (paint stripper) is hot enough. Gas based torches will change the stiffness of your material and you will regret it.

Yes, physically getting bigger.

Dell XPS had a batch laptops going crazy and pushing the touchpad up.

You will recognize it :-)

This.

Using a CEC link will make things even more simple, but that might involve additional hardware. Those raspberry thingies have native CEC on hdmi. For x86 you might have to look at some extra hardware.

And of course, Kodi is an example of a 10 foot interface.

Bluetooth or wifi, depending on the number of accesspoints…

Anyway, a really smart hack!

Sony SRS-RA8000 owner here. Can confirm it works with the plugin mentioned above.

Using Harman Kardon hardware yields in a way less happy experience.

NetApp makes storage devices, just like Dell’s DataDomain.

Looks like the ad is referring to a ST6000NM0034, a drive from Seagate. Personally, I like to stay away from that brand as far as possible.

Have had good experiences with WD.

Weighted blanket.

https://tukaani.org/xz-backdoor/

Check the links on that page.

Thanks for the pointer.

This is really huge, but people don’t quite understand that yet.

If this wasn’t caught, every system -running public sshd- could be hacked or abused/misused.

And I completely agree with the last words, corporate should pay foss projects!

Vlans firewall rules and something to route between the different networks.

This can all be achieved with pretty much every Linux installation.

Ok, this is really over the topz but I like it. Wouldn’t be too hard, to open the gate when the mower engages.

Clever and nice touch of adding the drain.

First check the dontvacuum.me site for compatibility.

Flash with modified firmware, run valetudo and disconnect from the Chinese cloud.

Valetudo integrates with HA.