Banana Pi BPI-M7 - A thin Rockchip RK3588 SBC with dual 2.5GbE, M.2 NVMe storage, HDM 2.1, and more - CNX Software
www.cnx-software.com
Banana Pi is working on the upcoming Banana Pi BPI-M7 SBC powered by Rockchip RK3588 SoC whose low profile design reminds me of boards from Khadas such as

The Banana Pi BPI-M7 single board computer is equipped with up to 32GB RAM and 128GB eMMC flash, and features an M.2 2280 socket for one NVMe SSD, three display interfaces (HDMI, USB-C, MIPI DSI), two camera connectors, dual 2.5GbE, WiFi 6 and Bluetooth 5.2, a few USB ports, and a 40-pin GPIO header for expansion.

  • TCB13@lemmy.worldOPEnglish
    142·
    1 year ago

    SBCs in the past the issue ends up being drivers. (…) outside that ecosystem with very little in the way of support for whatever oddball hardware your board has.

    The RPi does have a nice ecosystem but the trick is to pick a board supported by Armbian - that will ensure future kernel updates and low level things working fine. For instance I’ve been using a NanoPi M4v2 since 2018 with a RK3399 CPU mind that at that time it already had a PCIe x2 interface, 4GB of RAM and was cheaper than the Raspberry Pi 3 Model B+ from the same year that had Ethernet shared with the USB bus.