Had a few setbacks since last week, including needing to relube the belts with a more appropriate grease. Also, one of the parts for the clockwork 2 was busted. I can’t print ABS yet since I don’t have an enclosure, so I opted to print the clockwork parts in Fiberlogy PA12+CF15. PA12 is OK according to the Voron print guide so I’m hoping it’ll work. My PIF supplier said he’d send me a replacement, so I’ll have a spare in case.

Anyhow, everything is belted up, hotend is assembled, and I built my Klicky (that was a huge pain…), so I think I’m ready for electronics 😀

Having a hard time uploading the latest picture, will try again soon.

  • IMALlama@lemmy.worldEnglish
    3·
    10 months ago

    Congrats/nice work. With no panels I had some ASA warping while printing my panel clips. Cardboard tapped onto the frame fixed that, but I’m still doing smaller part batches to play it safe.

    I thought the wiring was pretty straightforward. I didn’t find klipper setup that hard either. I’ve used putty before, but would still consider myself a novice in most things Linux. Beware that your first mainsail boot can take a little while. Also keep in mind that your access point name is case sensitive…