I heard Mint is supposed to be the simplest distro to get started with but my experience so far (following the setup guide on the website) has been:

  • Download ISO
  • Check ISO (seemed fine)
  • Burn image… crash
  • Burn image in administrator mode
  • Boot from USB via BIOS… crash
  • Boot from USB via Bios in safe mode
  • Download multimedia codecs… crash
  • Not download multimedia codecs… also crash?

And that’s where I am presently, it runs fine off the USB albeit a bit slow, and I know its connected to the internet because I can browse lemmy on it and make annoying posts on the Linux community. I knew Linux was going to be more work than windows but this feels like a ridiculous level of effort right out of the gate, I worry that even if I somehow get it running I’ll spend 10x more time fixing it than actually using it.

  • kusivittula@sopuli.xyzEnglish
    51·
    13 hours ago

    etcher sucks ass. I read about it even breaking usb sticks, I’ve had it fail the flashing too multiple times. in mint I use the preinstalled usb flashing tool, in other distros popsicle and in windows rufus.

    • CheeseNoodle@lemmy.worldOPEnglish
      15·
      11 hours ago

      Reporting back, rufus fucked it up even more, laptop is now bricked. I know y’all are gonna say it has nothign to do with Linux but it was working perfectly for years right up until today when I tried to install Mint.

      (Bricked as in boots up but won’t boot to the Linux preview OR windows, possibly salvagable with a windows boot stick but currently a paperweight)

      • catloaf@lemm.eeEnglish
        6·
        9 hours ago

        It probably would have done the same if you had tried to install Windows or BSD.

        You should use a different USB drive and boot something like memtest86+ and let it run through. Or if it’s something like a Dell with built-in diagnostics, run that. You need to rule out failure of the different components. I’m guessing it’s the drive, but it could also be RAM.

        Usually, the Linux installers have memtest86+ built in, as well as media verification. I’d do the verification if you haven’t already, then memtest.

        • CheeseNoodle@lemmy.worldOPEnglish
          11·
          9 hours ago

          Mentioned in a different comment but I have installed a custom win10 on this same laptop with this same USB stick before.

          • Tippon@lemmy.dbzer0.comEnglish
            7·
            9 hours ago

            That doesn’t mean that your laptop hasn’t developed a problem in the meantime. As someone else said, you had problems before you ever tried booting from the USB stick, so before Mint ever ran on the hardware. It looks like a hardware issue.

          • Possibly linux@lemmy.zipEnglish
            41·
            8 hours ago

            A bad ram is hard to find in many cases since data in memory will just randomly corrupt. It might be totally fine for the most part but then an app will crash or data will get corrupted.

            I would run a men test for a few hours to see if you have a bad ram. Ram is one of the first things to go bad after storage.

      • Possibly linux@lemmy.zipEnglish
        31·
        8 hours ago

        This sounds like a hardware issue. Did you get to the installer phase? Linux don’t touch your disk until you hit install and then confirm.