Does anyone know of a mouse that can be used wireless, with a replaceable battery and that can be connected to the PC via USB-C to recharge the battery? Obtainable in Europe.

The reasoning is that I do not want to get into the situation where I do not have a charged replacement battery at hand and am therefore unable to use the mouse.

Currently I am using a mouse without a replaceable battery which got so old that the battery only holds for 1-2 hours without being connected to the cable.

I know I could simply go with a wired mouse, however, I like the cleanliness of minimal cables on my desk. Thanks for suggestions.

  • DrownedRats@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 month ago

    Damn, that’s a far cry from my experience with MX mice honestly. I’ve had my MX 2 from release and nothing like you’ve described happened to the coating on mine. I know some of that’s likely down to body chemistry, I have fairly dry hands and I keep my periferals religiously clean so perhaps I’m not the best example of an average end user.

    As for breakage, again, nothing of the sort. My brother has a master 2s and my brother in law has the master 3 and neither of them have had any breakage except that I had to swap a puffy battery on my brothers one about 4 years in which isn’t unusual for lipos and liions that are kept at full charge for extended periods of time.

    Again, not questioning your experience at all, we all have different situations that we use them in and I don’t know what yours is, but just wanted to share my personal experience.

    • jplatte@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 month ago

      How do you clean them? For the MX master, the worst bit to me is the rubber inside the scroll wheel(s).

      Re. breakage, one was almost certainly my own fault with transporting it too much / carelessly (primary scroll wheel could no longer enter the “clicky” mode), though I’ve also had the sensor for mouse movement fail on another one (those two are the ones I recently “merged”).

      • DrownedRats@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 month ago

        I use some electronic safe foaming cleaner I get from work and that does the trick. For any detailed stuff like the scroll wheel I’ll use a toothpick or sewing needle to get into the grooves. I never spray the cleaning foam directly on the mouse, just apply it through lint free cloth. That seems to do the trick for me! I also picked up a carry case for when I’m transporting mine.