I just switched from Windows 10 to Bazzite with KDE 6. I have experience with linux before, but not as a main OS. I have a Logitech Performance MX. I used SetPoint on Windows to fine-tune things.

For some reason, my scroll wheel acts differently in almost every program. Firefox is the only one that feels normal. My scroll wheel clicks as I scroll, and in Windows that would do 3 lines up or down.

Nothing except Firefox follows the clicking, so all my scrolling is super fine-grained as if I were scrolling with a trachpad. I tried Solaar and that gave me an option to turn off smooth scrolling, but now I need to scroll 6 or more times to see any movement. Increasing sensitivity in KDE just means after 6 times of nothing, the next one is a huge leap. There’s no middle ground it seems and I’m losing my mind trying to fix this.

Is there anything else I can do?

  • rtxn@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 month ago

    I had the same issue with the MX Master 3S. It’s caused by the hi-res scroll wheel feature of Logitech’s HID++. If you have a Bolt dongle, try using that instead of Bluetooth.

    If that’s not a fix, try blacklisting the hid-logitech-hidpp kernel module.

    Arch wiki article about module blacklisting: https://wiki.archlinux.org/title/Kernel_module#Blacklisting
    About kernel parameters in GRUB (should be the default bootloader in Bazzite): https://wiki.archlinux.org/title/Kernel_parameters#GRUB

    The easiest way to do it in GRUB is to:

    • open the /etc/default/grub file with root privileges
    • find the line starting with GRUB_CMDLINE_LINUX_DEFAULT=...
    • insert module_blacklist=hid-logitech-hidpp to the end separated by a single space
    • save the file
    • run grub2-mkconfig -o /boot/grub2/grub.cfg as root to apply the changes
    • reboot

    This will prevent loading the HID++ module entirely. The OS then shouldn’t be able to interpret high-res scroll events. You’ll also have to enable or disable the scroll wheel resolution in Solaar to handle it properly.

    (edit) tested in a Bazzite VM and updated the steps.

    • jws_shadotak@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      1 month ago

      I can’t wait to try this when I get home today. I can’t thank you enough for the details. I’ll let you know how it goes later.

      if you have a Bolt dongle, try using that instead of Bluetooth.

      I use the unifying receiver that came with the mouse.

    • jws_shadotak@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      1 month ago

      No dice :/

      This is my original grub file:

      GRUB_TIMEOUT=5
      GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
      GRUB_DEFAULT=saved
      GRUB_DISABLE_SUBMENU=true
      GRUB_TERMINAL_OUTPUT="console"
      GRUB_CMDLINE_LINUX="rhgb quiet"
      GRUB_DISABLE_RECOVERY="true"
      GRUB_ENABLE_BLSCFG=true
      

      I added:

      GRUB_CMDLINE_LINUX_DEFAULT="module_blacklist=hid-logitech-hidpp"
      

      and that didn’t work.

      I also tried this:

      GRUB_CMDLINE_LINUX="rhgb quiet" "module_blacklist=hid-logitech-hidpp"
      

      and that didn’t work.

      Either I’m formatting this incorrectly, or my setup is different somehow.

      • rtxn@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 month ago
        GRUB_CMDLINE_LINUX="rhgb quiet module_blacklist=hid-logitech-hidpp"
        

        and don’t forget to run sudo grub2-makecfg -o /boot/grub2/grub.cfg to apply the changes. When you reboot, press e on the GRUB screen to make sure the boot parameters are passed correctly.

        • jws_shadotak@sh.itjust.worksOP
          link
          fedilink
          arrow-up
          1
          ·
          30 days ago

          Still not working :/

          I looked at the boot parameters and the blacklist was not on there, so I typed it it and booted and it still didn’t work.

          • rtxn@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            29 days ago

            Hmm… this might break the OS completely, but you could delete the module’s binary files. Can’t load it if it doesn’t exist in the first place.

            Run find /lib/modules -iname '*hidpp*' and move the files it found to a location where you can recover them later if needed, then reboot.

            • jws_shadotak@sh.itjust.worksOP
              link
              fedilink
              arrow-up
              1
              ·
              29 days ago

              Hell, this is worth a shot.

              I 'm already shopping around for a new distro because of this. Games are completely unplayable because of the scroll wheel. The tiniest movement will swap weapons, even if I’m not touching the wheel at all.

              • rtxn@lemmy.world
                link
                fedilink
                arrow-up
                2
                ·
                edit-2
                29 days ago

                If you decide to ditch Bazzite, try either Garuda or EndeavourOS. They’re both Arch-based, which is not something I’d recommend for a beginner, but the rolling release will ensure that you always have the latest software.

                I’ve found some more workarounds for a similar scrolling-related HID++ issue: https://bugzilla.kernel.org/show_bug.cgi?id=216885#c52 (I know I used dash instead of underscore in the module names, it shouldn’t matter since they’re automatically converted)

                • jws_shadotak@sh.itjust.worksOP
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  27 days ago

                  Alright, I found a solution based on the last comment on that bug report!

                  Scrolling applications in plasma task switcher with G903 Lightspeed (wireless mode) is so fast that is unusable, but sudo modprobe -r hid_logitech_hidpp fix this, are these bugs all related?

                  Using that command turned every tiny scroll input into a full scroll. Pairing that with Solaar, disabling smooth scrolling, now everything works correctly!

                • jws_shadotak@sh.itjust.worksOP
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  26 days ago

                  If you decide to ditch Bazzite

                  Forgot to mention, I switched to Nobara. I had some difficulties with your recommended to remove the hidpp module file altogether and saw the frustrations that I’d have with an immutable distro. So far, Nobara has been super smooth.

  • BananaTrifleViolin@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 month ago

    I believe for mouse config in all DEs there are issues with the libinput library and X11 which can somewhat limit config options. If you’re using Wayland then you should find an advanced tab in the mouse options in KDE settings app which may do what you want.

    Otherwise imwheel is widely recommended command line tool. There is a comprehensive guide linked below, and the tool can be autostarted in the background once setup.

    https://www.baeldung.com/linux/mouse-scroll-speed

    • jws_shadotak@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      1 month ago

      KDE switched evdev to libinput and dropped some options, including the advanced config tab in the KDE mouse settings.

      Here’s all the options I have:

      (Screenshot taken from my laptop, but the menu for this mouse is the same)