There’s no point in hiding the transaction. A state level actor will see that you’re connecting to the Mullvad VPN addresses and won’t need to check your credit card statement to determine that you’re using it.

I’ve been doing this for a while now with opnsense being what masks the whole network behind the mullvad VPN.

Pros:

• Even fresh new devices that have all that crap junkware installed get routed through the VPN, meaning no tracking to you immediately (unless they sniff the rest of the network and relay your network AP I guess)
• one device instead of many, leaving extra devices available to use for a single mullvad account (limited to 5 devices, at least for wireguard)
• if using wireguard, you honestly won’t be hit with network performance issues. Just don’t choose a server across the world from you. I chose one in the same country as myself and get an average 95-97% of my internet speed, and that’s because I also have IDS/IPS enabled

Cons:

• as others mentioned, increase captcha annoyances
• some banks may lock your account if you try to log in with the VPN
• if the VPN server goes down, the whole network will. This may be a good thing since your don’t want traffic to leak, but just pointing out you now have another single point of failure outside your ISP
• when someone’s hoarding the entire VPN server you’re connected to, you’ll probably witness a slowdown

That all being said, if you’re not very technically savvy on the networking side or haven’t ever setup a custom router/firewall, this will be a pain. But it you want to learn something new and are up for the challenge, eventually it gets down to almost never having to worry about it. I’ve been doing it for a long time now, so for me personally, I’ve gotten to the point of only needing to login to the firewall for a VPN setting update or server change maybe once a month

Downsides include having to solve lots of captchas or just getting blocked by services. I prefer just booting up Tails and connecting through the VPN with that but give it a try.

Imo the most important thing is the separation of what you do. If you’re logged in on facebook, you can do that from your public ip. Anything you’re not associated with your name you want to use a diffferent browser identity and maybe a different ip.

If you use Torrents or do anything illegal or whistleblowing or similar stuff, use a live linux iso with no persistence and a vpn bought with monero.

There are a few performance issues that you may experience. For example, if you’re into online gaming then your latency will likely increase. Your internet connection bandwidth could also be limited by either Mullvad’s servers, your router, or any of the additional hops necessary due to the VPN. There’s also the situation where you have no internet connection at all due to an issue with the VPN connection.

There are also some user experience issues that users on the network nay experience. For example, any location based services based on IP address will either not work at all or require manual updates by the user. The same is true for other settings like locale, but they are hopefully better handled via browser/system settings. What’s more likely is content restrictions due to geographic IP addresses. Additionally, some accounts/activity could be flagged as suspicious, suspended, or blocked/deleted if you change servers too frequently.

I’m sure you are either aware of or thought through most of that, but you may want to make sure everyone on the network is fine with that too.

In terms of privacy and security, it really comes down to your threat model. For example, if you’re logged into Facebook, Google, etc. 24/7, use Chrome, Windows, etc., and never change the outbound Mullvad server, you’re not doing too much more than removing your ISP’s ability to log your activity (and maybe that’s all you want/need).

Router-level VPN is going to be more difficult to configure and cause more problems than just having it on all your devices. There are some games where online play just refuses to work if connecting through a VPN. Some mobile apps are the same. When a website blocks your currently selected server, and the usual solution is switching to another server, that’s going to be more difficult and more tedious when it’s configured at the router level. In addition, if you do something like using a self-hosted VPN in order to connect remotely to a media server on your home network, that becomes more difficult if your home router is on a different VPN.

If you’re trying to keep local devices in the building from phoning home and being tracked, a PiHole or router-level firewall might be a better solution. I think if you’re running a pfsense or opnsense router and are a dab hand with VLANs then maybe you could get what you’re looking for with router-level VPN, but it’s a huge hassle otherwise. Just put Mullvad on your computers and phones and call it a day.

I think your in a situation that a lot of users fall into, where your making your life harder without any benefit to your threat model.

You really have no reason to switch from Proton to Mullvad based on your threat model.

For a small win you can use Mullvad for DNS when you don’t have devices connected to a VPN.

I configured it as the upstream DNS from my pi-hole, I recommend the one with no blockers on so if you need to turn of vpns and disable blocking on your pi-hole nothing else will get in the way.

My threat model is generally removing as much passive data gathering and tracking as possible, corporate or state. My threat model does not include active investigation from the law enforcement or state

Honestly just route your tcp traffic through Tor, even if you’re being snooped on by guard and exit nodes owned by the state when using clearnet sites, no advertiser is going to know who you are, and state owned exit nodes aren’t going to investigate you for visiting random common clearnet sites (note even if you’re deanonymized you’re still protected by tls). No reason to pay for a VPN for this, and the more Tor users the safer Tor gets against certain types of attacks.

It’s worth noting neither a VPN nor Tor will protect you from advertisers fingerprinting you due to poor opsec; and that is very difficult to get around if you’re doing something like using popular social media platforms with an account.

I do this, I have different vlans setup using different wireguard tunnels. It’s totally fine.

Until you need to debug something, then it gets annoying

Depending on your threat model, you might want to make sure that your VPN connection fails safe, or fails dangerous, depending if you want the internet to always work, or you want to never leak

deleted by creator