but I think it might be!

  • Just_Pizza_Crust@lemmy.world
    link
    fedilink
    English
    arrow-up
    63
    arrow-down
    1
    ·
    1 year ago

    Fuck it 🤷🏻‍♀️ my uncle dropped 8k on a 3D printer post-divorce, and if working on a lil art and engineering makes him feel better I can support that.

    • hibbfd@kbin.social
      link
      fedilink
      arrow-up
      23
      ·
      edit-2
      1 year ago

      curious machine. I’m surprised to see such mediocre specs with that price tag.

      claims to be industrial yet uses 1.75mm hot end and can’t print any industrial grade materials

      • ParkingPsychology@kbin.social
        link
        fedilink
        arrow-up
        18
        ·
        edit-2
        1 year ago

        There’s a reason you don’t often see machines over 300x300x400. At that point it gets hard to keep tolerances tight, requiring manufacturing changes or else you end up with printing artifacts.

        This thing prints at 300mm/s at 1100x1100x820 and it’s manufactured in a first world nation at low volumes.

        It’s hard to see, but I think they made the gantry (the whole Z platform, I mean) out of two plates of aluminum. They didn’t bolt i beams together, it’s just two massive plates with holes cut into them. That’s the sort of engineering they did to get this thing to work at that size, with that speed.

        Doing that is expensive.

      • EmilieEvans@lemmy.ml
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        1 year ago

        The support is awesome.

        The mixing nozzle/extruder is one of the better ones.

        What you call medicore specs are decent parts. They use ball bearings fan, Misumi stepper, etc. paired with decent workmanship like strain relieving the cables.

        What could be cheaper are the nozzle replacements at 70€ each. Still not the worst out there in terms of nozzle pricing (e.g.150€ for a brass nozzle + heater … [different company]).

        Edit: It was 70€ for 2 builder nozzles or 175€ for 6.

        • hibbfd@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          1 year ago

          don’t get me wrong, getting a printer this big to run at those speeds must be quite a feat of precise engineering and craftsmanship. but in my opinion this machine is no more than a novelty; a machine no more capable than an off-the-shelf ender 3.

          can you imagine producing a prototype from this machine? I have half a notion to build a profile for it in my slicer just to see how long I’d be waiting for a part 1m in any dimension.

          is it cool? without a doubt. but FDM at this scale using 0.4mm to 1.0mm nozzles and 1.75mm filament is pointless. I think they missed the beat here by not engineering a hot end with greater extrusion capabilities. if it were fitted with, say, a 2mm nozzle it would be much more capable of producing large parts in a reasonable time frame.

          • EmilieEvans@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Regarding the hotend you are right. 10-15 years ago they shipped their first printer (consumer around $1.5k). The only visible difference is the longer heating zone similar to what E3D did when they made the V6 a vulcano. The the current style is was probably introduced around 2014.

            It’s time for them to step up the game.

      • FuglyDuck@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I mean, my first large printer, I just took an old prusa i3 (not the mark 3, this was from years ago) and built a new frame around the hardware. had about the same performance.

      • CmdrShepard@lemmy.one
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I’m surprised they didn’t make it a bed slinger to save on costs. That’d be hilarious to watch print something.

    • ikidd@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      I built a 36" x 18" x 18" by welding a Prusa style aluminum frame up from scrap aluminum plate, and running the bed on 8mm rods and bearings. Dual Volcano 1.2mm hotend, it prints nearly as fast as that. It has about a dozen 110V heater pods mounted to the aluminum/glass bed. I’ve printed some big things on that since I built it about 8 years ago.

      I might be $500 into it.

      • player2@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        slaps roof This baby has been going since the early '20s. We’ve been through a lot together, almost every part has been replaced, and it’s still not reliable!

      • AngryCommieKender@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        1 year ago

        If you have one of the consumer metal printers and a consumer plastic printer, it means you can print your own car parts from aluminum, iron, or lower carbon steel pellets, and all the trim with the plastic printer.

        Congratulations, you have a body shop, and an example car.

        Getting ahold of the original specifications becomes the biggest challenge at that point, so that you can manufacture the parts within tolerance.

    • CADmonkey@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      I have a 3D printer, and a Suzuki Samurai. More than a few parts for the 35 year old Suzuki have been printed by me.

        • Hazdaz@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          I’ll tell you what, using that points distributor on my Lulzbot has sped up printing considerably! Unfortunately the print nozzle connected to the 401 nailhead sure makes the Buick hard to start.

      • Thrawne@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I have been making parts for my FIL’s 61 Ranchero. I have made almost every gasket, the heating couplers, and dash knobs.

        • Hazdaz@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          I’ve made a few logos. One of them I used to make a stamping die that deformed some sheet metal. Worked shockingly well.

          I’ve also made a simple phone mount and a lens for the glovebox. My ultimate plan is to make the housing for new headlights, but lack of time and wanting to scan rather than measure the sheetmetal opening has slowed me down on that project.

    • Taleya@aussie.zone
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      1
      ·
      1 year ago

      Just outing myself here as female should someone wish to do a comparison study across genders.

  • Transcriptionist@lemmy.world
    link
    fedilink
    English
    arrow-up
    18
    ·
    1 year ago

    Image Transcription:

    An Opinion article by Michelle Cottle reading “Is the Cure to Male Loneliness Buying A Huge 3D Printer?”

    Below is a photo of a man using an Extreme 3000 Pro 3D printer with a drawing of a crying man standing to the side and watching him.

    [I am a human, if I’ve made a mistake please let me know. Please consider providing alt-text for ease of use. Thank you. 💜]

  • ArugulaZ@kbin.social
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    Uh, question. What if you don’t have a 3D printer, but need something 3D printed? I’ve asked around, and there are no 3D printers available in this area. Is there an online fabrication service you can use? I want to get a higher profile D-pad for my Switch Lite, to replace the crappy one Nintendo put in there by default. Unfortunately, there’s limited size tolerance, and it seems that specific equipment is required.

    https://www.thingiverse.com/thing:4073473

  • gamer@lemm.ee
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    We already have the technology for AI waifus. I bet we’ll be able to print AI body pillows before the end of next year.